Playground Flooring

We provide the most modern playground flooring & safety surfacing available on the market.Wet Pour is a continuous rubber surface which has excellent impact absorption and anti-slip properties. Available in a variety of thicknesses, it is by far the best material for any application; whether you have a traditional outdoor playground, a trim trail, or require indoor surfacing. Although it can be difficult to install, the effort pays for itself in the long term as wet pour requires little to no maintenance, and is very unlikely to deteriorate over years of use. 

For advice on which material suits your playground’s needs, please do not hesitate to contact us – a member of our friendly team will be happy to help!  

  Tel: +971 4 2555724   |    Mob: +971 56 4802145 |    Email:     This email address is being protected from spambots. You need JavaScript enabled to view it.

 

Playground Flooring UAE

 

 

So What is Playground Rubber Flooring ?

Elastic safety wet-pour flooring ideal for children playground in thickness from 4cm – 15cm. Can be also  used as first wet-pour layer of 6mm – 15mm for volleyball, handball, basketball, football courts and multipurpose courts, with the parallel use of paver machine. Consists of mixture of RECYCLED RUBBER 858 (72% by weight) with colored PU BINDER 1120 (24% by weight) and PU BINDER 1118 (4% by weight) applied by trowel with the parallel use of a cylinder (10kg). It can create many designs and patterns since the binder is produced in various colors with the parallel use of special PU UV resistant paint POLYSPORT 1052 in a 2 cross layers by airless spray.The mixture of RECYCLED RUBBER 858 with colored PU BINDER 1120 and PU BINDER 1118, is applied in thickness of 40mm till 150mm and can be colored in all the thickness or alternatively, in the last 10mm minimum top thickness of the system. The rest thickness of the system is achieved with a mixture of clear PU BINDER 1118 and SBR granules in granulometry of 1-3mm. In both cases, the top coat is the special PU UV – resistant paint POLYSPORT 1052.   

 

Steps :   

a/ Playground Application  

1. PU PRIMER 870 – Polyurethane Primer . Applied by brush.   

2. Mixture of RECYCLED RUBBER 858, PU BINDER 1120 and PU BONDER 1118. Applied by flat metal  trowel after spreading and leveling with rake and straightedge. Rolling with cylinder follows for compacting.Minimum 40mm thick or 10mm thick on 30mm mixture of SBR plus PU BINDER.  

3. POLYSPORT 1052 –UV-resistant PU paint. Sprayed on the surface in the desired color as a double UV  protection of the color on the surface, to create different designs and patterns and last for many years.        

b/ Sport Flooring Application  

1. PU PRIMER 870 – Polyurethane Primer . Applied by brush.   

2. Mixture of RECYCLED RUBBER 858, colored PU BINDER 1120 and PU BINDER 1118. Applied by paver  machine in total thickness of 10mm.   

3. POLYSPORT 1052 –UV-resistant PU paint. Sprayed on the surface in the desired color as a double UV  protection of the color on the surface, to create different designs and patterns and last for many years. 

Important Remarks  

1. During summer or during temperatures over 35 degrees, ideal time for the application of SAFEPOL SYSTEM is between 21 00 and 06 00 and temperature less than 30oC, while in the winter the minimum bearing temperature during application  and drying should be  over 10oC. 

2. The freshly coated surface should be protected from high temperatures, wind, rain and frost for at least the first 24 hours. 

3. In case it gets damaged, it is simply repaired and recoated on the spot

 

Contact us for Playground Flooring in UAE

 

  Tel: +971 4 2555724   |    Mob: +971 56 4802145 |    Email:    This email address is being protected from spambots. You need JavaScript enabled to view it.